ETH-B4 Link

Available Product id: ETH-B4-LINK-V1
Shipping Worldwide : Will be shipped as soon as possible

Similar to SDI-B4 Link but the data input is via network instead of SDI. The protocol is also Blackmagic Camera Control, but over UDP (“UDP Camera Control”) and typically served by a SKAARHOJ controller. Has an incredibly light and compact form factor.

With the SKAARHOJ ETH-B4 Link the iris control data is sent separately from the camera control data over ethernet instead of over SDI. The ETH-B4 Link has a camera selector switch that sets it’s camera ID filter as well as its IP address and the iris data it receives is output on the Hirose-12 connector. It also features a tally lamp (red/green) and a relay output (PGM tally out).

Shipping Worldwide : Will be shipped as soon as possible
Hirose 12-pin connector
Tally on small LED

Preview/program tally on small LED

Selector switch

Set camera number via selector switch

3-pin phoenix connector

Program tally from 3-pin phoenix connector: Ground, IO, 12V (VIN)

ETH-B4 Link  
Length: 105 mm Width: 355 mm
Height: 115 mm Total weights: 1.289kg.
EAN Code - Tariff Code & CoO

ETH-B4 Link
EAN Code: 5714074002451
US Tariff Code: 8471.80.10
Rest of the World Tariff Code: 8471.80.00
CoO: Denmark

12V Power Supply

Manufacturer: PHIHONG

Model Name: PSA15R-120P

Output: 12V/1.25A

Cable Length: 1.5m

Adapter type: EU, GB, US, AU depending on shipping conutry

DC Output Connector: 5.5mm x 2.1mm x 10mm Center Positive

USB Programming Cable

Type: USB 2.0 A-Micro B

Length: 1m

Recommended cables (not in the box)

As of September 1st 2022, we will no longer send Networking Cables when we ship our controllers, due to the environment. Instead, we will recommend using LAN Cat 6 S/FTP or better.