€1,499

PTZ Fly

Delivery typically in less than 4 weeks Product id: PTZ-Fly-V1
Shipping Worldwide : Will be shipped as soon as possible

Pan, tilt and rotate the handle to control your cameras.

The superb OLED displays clearly show what camera settings you control and which preset you recall.

With UniSketch OS, everything is possible.

Enjoy quicker setup, new device cores, updated configurations and features with the new Blue Pill technology. See our new product here.

Shipping Worldwide : Will be shipped as soon as possible
Backlit encoders

High-quality backlit encoders with widescreen OLED displays

3-axis joystick
Four-way buttons

Programmable four-way buttons with bright OLED displays

Multifunctional keys

Multi-function keys for presets and camera selection

Form Factor

Slim, ergonomic console form factor

PoE

Ethernet with PoE (IEEE802.3af)

Lumens VC-A50P

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

NewTek NDI-HX PTZ1

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

PTZOptics PTx

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Sony BRC-X1000/H800

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Panasonic PTZ

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

The configuration automatically detects which Panasonic model(s) are connected and allow for model specific adjustments.

Please see information about which models are currently supported in the "Panasonic PTZ" Device Core.

Models that are not supported have basic PTZ and preset functionality.

Vaddio RoboSHOT

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as Auto Iris, white balance and more.

Labeled presets are included as well.

Please see information about which models are currently supported in the “Vaddio RoboSHOT“ Device Core + manual.

Control via Ethernet.

NewTek NDI-HX PTZ1 + Panasonic PTZ

A combo configuration for NewTek NDI PTZ camera HDI-HX PTZ1 and Panasonic PTZ.

By default the configuration controls 3 x NewTek and 2 x Panasonic PTZ cameras but this can easily be modified by altering the “System: Camera Select” function on the camera select row.

For Panasonic please see information about which models are currently supported in the "Panasonic PTZ" Device Core.

Models that are not supported have basic PTZ and preset functionality.

Control via Ethernet.

BMD Cam Control via ATEM + Panasonic PTZ

A combo configuration for Blackmagic Cam Control via ATEM and Panasonic PTZ.

By default the configuration controls 2 x BMD Cameras and 3 x Panasonic PTZ cameras but this can easily be modified by altering the “System: Camera Select” function on the camera select row.

For Panasonic please see information about which models are currently supported in the "Panasonic PTZ" Device Core.

Models that are not supported have basic PTZ and preset functionality.

Control via Ethernet.

BMD Cam Control via SDI

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Control data is through SDI out (requires SDI option).

BMD Cam Control via ATEM

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Control data is through an ATEM switcher or SKAARHOJ ATEM Proxy.

Skaarhoj Raw Panel

In Raw Panel mode the controller will work as a TCP Client connecting to a server IP address on port 9923.

The server receives simple action commands when buttons, encoders, faders etc are activated.

In return the server sends button colors and display content. The API is documented as “UniSketch TCP Client” on our GitHub repository.

In Raw Panel mode, all the logic is placed on the server, which is typically a custom written software application.

AJA RovoCam ePTZ
Sony SRG-300
BirdDog P200

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Please see the BirdDog P200 Device Core manual for details.

Bolin VCC-7HD30S-3SMN [Beta Config]

Beta Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Please see the Bolin VCC-7HD30S-3SMN Device Core manual for details.

NewTek NDI-HX PTZ1 + BirdDog P200

A combo configuration for NewTek NDI PTZ camera HDI-HX PTZ1 and BirdDog P200.

By default the configuration controls 3 x NewTek and 2 x BirdDog P200 cameras but this can easily be modified by altering the “System: Camera Select” function on the camera select row.

For BirdDog please see information in the Device Core manual about current state of support for the camera.

Control via Ethernet.

Lumens VC-A61P

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Ross PivotCAM

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

Angekis Saber Plus U3D-12FHD6

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

AIDA PTZ-X12-IP

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector.

Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more.

Labeled presets are included as well.

DataVideo PTC-140

Default configuration for DataVideo PTC-140 IP camera.

DataVideo PTC-150

Control of DataVideo PTC-150 via a Ethernet-Serial converter

Avonic CM71-IP

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

NewTek PTZUHD

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

eMotimo ST4

Test configuration for the motion control camera robots system: Spectrum ST4.

PTZOptics PTx w. Remote Cruise Control

Test configuration with PTZ Cruise Control via Foot Pedal connected to ETH-GPI Link remotely.

Sony BRC-X400

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

BirdDog P100

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well. Please see the BirdDog P100 Device Core manual for details.

Bolin 4K

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

eMotimo ST4 Multicam Test Config

Test configuration for the motion control camera robots system: Spectrum ST4. This configuration is under development. Currently aimed at controlling two or more systems at the same time.

JVC KY-PZ100

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well. Please see the JVC PTZ Device Core manual for details

Minrray UV510A-S12/S20

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

Marshall CX620

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

Sony SRG-X400

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

Everet EVP220N

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

​​​​​​Canon CR-N500/N300

Configuration for 5 cameras with 4-way shift key that toggles between presets and camera selector. Menu is cycled on upper edge of shift key which brings up parameters for the four encoders such as exposure, white balance and more. Labeled presets are included as well.

Hall Effect Joystick

Upgrade to an industrial precision Hall effect joystick for increased ergonomic comfort and motion precision

Dimensions
PTZ Fly  
Length: 196 mm Width: 94 mm
Height: 47 mm Total weights: 0.494 kg.

 

PTZ Fly w/Hall Effect Joystick option  
Length: 196 mm Width: 94 mm
Height: 47 mm Total weights: 0.654 kg.

 

You can find our technical drawings on this site:
https://www.skaarhoj.com/media-files

Shipping data (Box)
PTZ Fly  
Length: 230 mm Width: 140 mm
Height: 150 mm Total weights: 1.206 kg.

 

PTZ Fly w/Hall Effect Joystick option  
Length: 230 mm Width: 140 mm
Height: 150 mm Total weights: 1.248 kg.

 

Power Consumption

PTZ Fly

2.74 Watt


PTZ Fly w/Hall Effect Joystick option

2.98 Watt

Data Sheet

Check out our data sheet for hardware specs, and other technical information. 

Click here for download: Data Sheet

Devices the product connects with

Notably, but not limited to:

Canon CR-N300 / 500

BirdDog P100 / P200

Panasonic AW-UE150

JVC KY-PZ100

Sony BRC-X400 / X1000

PTZ Optics

For a comprehensive list of UniSketch supported devices and configurations click here.

EAN Code - Tariff Code & CoO

PTZ Fly

EAN Code: 5714074001218

US Tariff Code: 8471.80.10

Rest of the World Tariff Code: 8471.80.00

CoO: Denmark


PTZ Fly w/Hall Effect Joystick option

EAN Code: 5714074001737

US Tariff Code: 8471.80.10

Rest of the World Tariff Code: 8471.80.00

CoO: Denmark

Overview of the PTZ Fly

In this video you will get an overview of what you can do with the PTZ Fly.
Kasper will show you a few tips and tricks, and give you 2 quick demos of how to use it.

PTZ Fly joystick controller for NewTek NDIHX-PTZ1

SKAARHOJs IP based joystick controllers, including PTZ Fly, are demonstrated on NewTeks NDI HX-PTZ1 robotic camera in a surprising dual-panel configuration. Click “Show More” below for additional information.

With VISCA over IP implemented on NewTeks NDI HX-PTZ1 camera you can connect multiple controllers to the same camera which is at worst just cool but probably far more useful than you may think. We will demonstrate that in a different video on separating the camera operation and shading concerns two different operators. In this video the PTZ Fly is introduced as a mid-size joystick controller with a simpler interface but equal amount of theoretical capabilities as the PTZ Pro.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

NewTek NDIHX-PTZ1 and preset buttons with OLED display labels

PTZ Fly from SKAARHOJ can easily display custom labels for presets on the preset recall buttons. See it in action on NewTeks fantastic NDI PTZ camera. Click “Show More” below for additional information.

In the video I will show how to apply on-the-fly labels on the controllers buttons for presets using a webbrowser on the same network. In addition a little extra is thrown into the mix: Adding a routing action to the camera selector buttons so a videohub changes route on a given output when camera 1, 2 and 3 is selected.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

AJA RovoCam 4K Joystick and Parameter Control

Use a dedicated, tactile hardware controller with a real joystick to control you AJA RovoCam. This includes parameters like exposure, white balance, focus etc. but also zoom and the electronic Pan/Tilt Region-of-interest features in the camera. Click “Show More” for further information.

The SKAARHOJ PTZ Fly is used in this video demonstration to access all these parameters including the ability of positioning the region-of-interest in the camera.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

Vaddio RoboSHOT PTZ Control Panel

See Kasper demonstrate how SKAARHOJs hardware PTZ Controllers can work with RoboSHOT 12, 30 SDI and HD-Base T versions and the new UHD RoboShot 20. We have integrated deep control of the cameras, making them useful for broadcast and live production applications. Click “Show More” for details.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

Sony SRG-300 PTZ Controller

VISCA over IP controller from SKAARHOJ with customised support for SRG-300 specific value ranges and features. The video also demonstrates how easy it is to change from one type of camera support to another.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

PTZ Optics - State information and On Screen Menu navigation


SKAARHOJ controllers now implement the latest protocol features added by PTZ Optics so you can use multiple controllers with PTZ Optics and have the camera parameters exchanged to each independent controller. OSD menu can now be navigated via VISCA commands from the SKAARHOJ controllers.

License Creative Commons Attribution license (reuse allowed)
https://support.google.com/youtube/answer/2797468

12V Power Supply

Manufacturer: PHIHONG

Model Name: PSA15R-120P

Output: 12V/1.25A

Cable Length: 1.5m

Adapter type: EU, GB, US, AU depending on shipping conutry

DC Output Connector: 5.5mm x 2.1mm x 10mm Center Positive

USB Programming Cable

Type: USB 2.0 A-Micro B

Length: 1m

Recommended cables (not in the box)

We will recommend using LAN Cat 6 S/FTP or better.