PTZ Fly - a compact controller featuring a full size three-axis joystick

Pan, tilt and rotate the handle to control your cameras. The superb OLED displays clearly show what camera settings you control and which preset you recall. With UniSketch OS, everything is possible. Customize it with a hall effect joystick or an SDI output for Blackmagic Micro Studio Camera control on a pan-tilt head.

 

 

 

 

 

 

 

 

 

 

  • High-quality backlit encoders with widescreen OLED displays
  • 3-axis joystick
  • Programmable four-way buttons with bright OLED displays
  • Multi-function keys for presets and camera selection
  • Slim, ergonomic console form factor
  • Ethernet with PoE (IEEE802.3af)
  • UniSketch OS

 

 

Upgrade to an industrial precision Hall effect joystick for increased ergonomic comfort and motion precision

The SDI option adds a Blackmagic Arduino shield to the controller for reading and writing Camera Control Data

 

PTZ Fly works with a great variety of device cores and is a popular choice for:

 
 

 

 

Side connector no longer available
Side connector no longer available

 

 


PTZ Fly
PTZ Fly w/Hall Effect Joystick
PTZ Fly
PTZ Fly w/Hall Effect Joystick

You either place your order by PayPal or by email and pay by bank transfer - please read the "Pricing, Terms and Conditions" page for more details. 

€ 1249

- for customers worldwide (except USA)  

Purchase:

$ 1399

- for customers in USA

Purchase:

If you see this PayPal error when you put our products in your shopping cart, you probably already have items in your cart but in a different currency. Paypal doesn't explain this error very well. Simply empty your cart and make sure to put only USD or EUR items into it.

 

 

Note for SKAARHOJ controllers with Blackmagic 3G-SDI Arduino Shields and Studio Fiber Converter/Camera Fiber Converter:

We have tested Blackmagics fiber converter products in general to work with SDI output. This includes the Mini Converter, ATEM Camera Converter, ATEM Studio Converter and ATEM Talkback Converter 4K. The only product we know does not work is the Studio Fiber Converter/Camera Fiber Converter. This product is not compatible with their own 3G-SDI shield which is the component we use inside the RCPs and other products. While the Studio Fiber Converter/Camera Fiber Converter will forward shading data from an ATEM switcher it will not do so for the 3G-SDI shield.

Bottom line is this: We cannot change this situation, only Blackmagic Design can decide to upgrade either the Studio Fiber Converter/Camera Fiber Converter or the 3G-SDI Arduino Shield to make it work. At this point we can suggest that you rather connects a controller to an ATEM switcher which will work as the master for sending out the shading data. You might employ a cheap ATEM switcher for only this purpose.

Embedding CCU data on the the 3G-SDI return feed

For controllers with the SDI option, you find a 3G-SDI in and out BNC plug. Route the return feed to the camera through this connection to insert CCU data on the signal.

If you use the Blacmagic 3G-SDI Arduino Shield for camera control the following outputs are supported: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.

BMD Camera Support

SKAARHOJ units with the SDI option controls any Blackmagic camera that supports CCU over the return SDI feed. The CCU data is inserted on the SDI return feed.

Compatibility for CCU Control, Tally and Program Return Feed for the BMD 3G-SDI Arduino Shield