RCPv2 - the world's most flexible RCP just got better

Fits into your existing rack or sits console style on a table top. Use this universal RCP regardless of which camera brand you shade! With the motorized fader option you have the perfect multi camera RCP. Dedicated to scalability and a positive, unified user experience.

 

 

 

 

 

 

 

 

  • Super crisp window with large display tiles for settings
  • High-quality encoders with RGB backlight for function identification
  • Pressure and direction sensitive joystick pad
  • Camera ID display with OLED technology and RGB tally bar
  • Classic iris joystick (with master black ring and preview button) or motorized fader with display and LED bar
  • Preview button for GPI or control of video router
  • Four-way buttons with OLED legends for dynamic labeling and functionality
  • Fits in your existing OB van rack with a Sony RCP Form Factor (4"/102mm wide) or sits console style on table top
  • Ethernet with PoE (IEEE802.3af)
  • UniSketch OS
  • Technical Drawing #1 / Technical Drawing #2

The SDI option adds a Blackmagic Arduino shield to the controller for reading and writing Camera Control Data

 

Order your RCPv2 with a motorized fader for the ultimate user experience

 

RCPv2 works with a great variety of device cores and is a popular choice for:

 

 

 

 

 

You either place your order by PayPal or by email and pay by bank transfer - please read the "Pricing, Terms and Conditions" page for more details. 

€ 2349

- for customers worldwide (except USA)  

Choose model:

$ 2699

  - for customers in USA

Choose model:

Included:

Shipping configurations:

If you see this PayPal error when you put our products in your shopping cart, you probably already have items in your cart but in a different currency. Paypal doesn't explain this error very well. Simply empty your cart and make sure to put only USD or EUR items into it.

 

 

With the release of Blackmagic Camera Setup 6.9.2 the 3G SDI Shield/Fiber System compatibility have been resolved
Compatibility for CCU Control, Tally and Program Return Feed for the BMD 3G-SDI Arduino Shield

Note for SKAARHOJ controllers with Blackmagic 3G-SDI Arduino Shields and Studio Fiber Converter/Camera Fiber Converter:

 

Please Notice: Previously the Studio Fiber Converter/Camera Fiber Converter was not compatible with their own 3G-SDI shield which is the component we use inside the RCPs and other products. However with the release of Blackmagic Camera Setup 6.9.2 (April 2020) this have now been resolved.

We have tested Blackmagics fiber converter products in general to work with SDI output. This includes the Mini Converter, ATEM Camera Converter, ATEM Studio Converter and ATEM Talkback Converter 4K and now also the Studio Fiber Converter/Camera Fiber Converter.

Embedding CCU data on the the 3G-SDI return feed

For controllers with the SDI option, you find a 3G-SDI in and out BNC plug. Route the return feed to the camera through this connection to insert CCU data on the signal.

If you use the Blacmagic 3G-SDI Arduino Shield for camera control the following outputs are supported: 720p50, 720p59.94, 720p60, 1080i50, 1080i59.94, 1080i60, 1080p23.98, 1080p24, 1080p25, 1080p29.97, 1080p30, 1080p50, 1080p59.94 and 1080p60, but the camera doesn´t have to be running the same video format as the program input, so you can use cameras in Ultra HD while the camera protocol is sent over HD signal to the camera.

BMD Camera Support

SKAARHOJ units with the SDI option controls any Blackmagic camera that supports CCU over the return SDI feed. The CCU data is inserted on the SDI return feed.